1N4001

PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

FEATURES l Low forward voltage drop l High current capability l High reliability

l High surge current capability

l Exceeds environmental standards of MIL-S-19500/228

MECHANICAL DATA Case: Molded plastic , DO-41 Epoxy: UL 94V-O rate flame retardant

Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed

Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25󰀀 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.

1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS

Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 75 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V

1.0 A Maximum Average Forward Rectified

Current .375\"(9.5mm) Lead Length at TA=75󰀀

Peak Forward Surge Current 8.3ms single 30 A half sine-wave superimposed on rated load (JEDEC method)

Maximum Forward Voltage at 1.0A DC and 1.1 V 25󰀀

Maximum Full Load Reverse Current Full 30 󰀀A Cycle Average at 75󰀀 Ambient

Maximum Reverse Current at TA=25󰀀 5.0 󰀀A At Rated DC Blocking Voltage TA=100󰀀 500 󰀀A Typical Junction capacitance (Note 1) 15 PF Typical Thermal Resistance (Note 2) R󰀀JA 50 󰀀/W Typical Thermal resistance (NOTE 2) R󰀀JL 25 󰀀/W

󰀀 Operating and Storage Temperature Range -55 to +150

TJ,TSTG

DO-41

NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.

2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375\"(9.5mm) lead length P.C.B mounted.

RATING AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007

Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE

Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT

Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICAL REVERSE CHARACTERISTICS