元器件交易网www.cecb2b.com SN54AHCT574, SN74AHCT574OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTPUTSSCLS245L – OCTOBER 1995 – REVISED JULY 2003DInputs Are TTL-Voltage CompatibleDLatch-Up Performance Exceeds 250 mA PerJESD 17SN54AHCT574...J OR W PACKAGESN74AHCT574...DB, DGV, DW, N, NS, OR PW PACKAGE(TOP VIEW)DESD Protection Exceeds JESD 22– 2000-V Human-Body Model (A114-A)– 200-V Machine Model (A115-A)– 1000-V Charged-Device Model (C101) SN54AHCT574...FK PACKAGE(TOP VIEW)2D1DOEVCCOE1D2D3D4D5D6D7D8DGND1234567891020191817161514131211VCC1Q2Q3Q4Q5Q6Q7Q8QCLK3D4D5D6D7D45678321201918171615149101112131Q2Q3Q4Q5Q6Qdescription/ordering informationThe ’AHCT574 devices are octal edge-triggered D-type flip-flops that feature 3-state outputs designedspecifically for driving highly capacitive or relatively low-impedance loads. These devices are particularlysuitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs.A buffered output-enable (OE) input places the eight outputs in either a normal logic state (high or low) or thehigh-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly.The high-impedance state and the increased drive provide the capability to drive bus lines without interface orpullup components.ORDERING INFORMATIONTAPDIP – NSOICDWSOIC – DW–4040°CC to 85to85°CSOP – NSSSOP – DBTSSOPPWTSSOP – PWTVSOP – DGVCDIP – J–55°C to 125°CCFP – WLCCC – FKPACKAGE†TubeTubeTape and reelTape and reelTape and reelTubeTape and reelTape and reelTubeTubeTubeORDERABLEPART NUMBERSN74AHCT574NSN74AHCT574DWSN74AHCT574DWRSN74AHCT574NSRSN74AHCT574DBRSN74AHCT574PWSN74AHCT574PWRSN74AHCT574DGVRSNJ54AHCT574JSNJ54AHCT574WSNJ54AHCT574FKTOP-SIDEMARKINGSN74AHCT574NAHCT574AHCT574HB574HB574HB574SNJ54AHCT574JSNJ54AHCT574WSNJ54AHCT574FK†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelinesare available at www.ti.com/sc/package.Please be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.Copyright 2003, Texas Instruments IncorporatedOn products compliant to MIL-PRF-38535, all parameters are testedunless otherwise noted. On all other products, productionprocessing does not necessarily include testing of all parameters.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•8DGNDCLK8Q7Q1元器件交易网www.cecb2b.comSCLS245L – OCTOBER 1995 – REVISED JULY 2003SN54AHCT574, SN74AHCT574OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTPUTSdescription/ordering information (continued) OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered whilethe outputs are in the high-impedance state.To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullupresistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.FUNCTION TABLE(each flip-flop)INPUTSOELLLHCLK↑↑H or LXDHLXXOUTPUTQHLQ0Zlogic diagram (positive logic)OECLK111C11D21D191QTo Seven Other Channelsabsolute maximum ratings over operating free-air temperature range (unless otherwise noted)†Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 VInput voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 VOutput voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 VInput clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mAOutput clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mAContinuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mAContinuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±75 mAPackage thermal impedance, θJA (see Note 2):DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/WDGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/WDW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/WN package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/WNS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/WPW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/WStorage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.NOTES:1.The input and output voltage ratings may be exceeded if the input and output current ratings are observed.2.The package thermal impedance is calculated in accordance with JESD 51-7.2POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com SN54AHCT574, SN74AHCT574OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTPUTSSCLS245L – OCTOBER 1995 – REVISED JULY 2003recommended operating conditions (see Note 3)SN54AHCT574MINVCCVIHVILVIVOIOHIOL∆t/∆vSupply voltageHigh-level input voltageLow-level input voltageInput voltageOutput voltageHigh-level output currentLow-level output currentInput transition rise or fall rate004.520.85.5VCC–882000MAX5.5SN74AHCT574MIN4.520.85.5VCC–8820MAX5.5UNITVVVVVmAmAns/VTAOperating free-air temperature–55125–4085°CNOTE 3:All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,Implications of Slow or Floating CMOS Inputs, literature number SCBA004.electrical characteristics over recommended operating free-air temperature range (unlessotherwise noted)PARAMETERVOHVOLIIIOZICC∆ICC†CiCoTESTCONDITIONSTEST CONDITIONSIOH = –50 mAIOH = –8 mAIOL = 50 mAIOL = 8 mAVI = 5.5 V or GNDVO = VCC or GNDVI = VCC or GND,IO = 0One input at 3.4 V,Other inputs at VCC or GNDVI = VCC or GNDVO = VCC or GNDVCC45V4.5 V45V4.5 V0 V to 5.5 V5.5 V5.5 V5.5 V5 V5 V33TA = 25°CMINTYPMAX4.43.940.10.36±0.1±0.2541.35104.5SN54AHCT574MIN4.43.80.10.44±1*±2.5401.5MAXSN74AHCT574MIN4.43.80.10.44±1±2.5401.510MAXUNITVVmAmAmAmApFpF* On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V.†This is the increase in supply current for each input at one of the specified TTL voltage levels, rather than 0 V or VCC.timing requirements over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V(unless otherwise noted) (see Figure 1)TA = 25°CMINMAXtwtsuthPulse duration, CLK high or lowSetup time, data before CLK↑Hold time, data after CLK↑531.5SN54AHCT574MIN5.53.51.5MAXSN74AHCT574MIN5.53.51.5MAXUNITnsnsnsPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•3元器件交易网www.cecb2b.comSCLS245L – OCTOBER 1995 – REVISED JULY 2003SN54AHCT574, SN74AHCT574OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTPUTSswitching characteristics over recommended operating free-air temperature range,VCC = 5 V ±0.5 V (unless otherwise noted) (see Figure 1)PARAMETERfmaxtPLHtPHLtPZHtPZLtPHZtPLZtPLHtPHLtPZHtPZLtPHZtPLZtsk(o)CLKOEOECLKOEOEQQQQQQFROM(INPUT)TO(OUTPUT)LOADCAPACITANCECL = 15 pFCL = 50 pF=15pFCL = 15 pFCL = 15 pF=15pFCL = 15 pF=15pFCL = 50 pF=50pFCL = 50 pF=50pFCL = 50 pF=50pFCL = 50 pFTA = 25°CMINTYPMAX130**85180**1155.5**5.5**5**5**5.5**5.5**7766778.6**8.6**9**9**9**9**10.610.6111110.110.11***SN54AHCT574MIN110**751**1**1**1**1**1**11111110**10**10.5**10.5**10.5**10.5**121212.512.511.511.5MAXSN74AHCT574MIN11075111111111111101010.510.510.510.5121212.512.511.511.51MAXUNITMHznsnsnsnsnsnsns ** On products compliant to MIL-PRF-38535, this parameter is not production tested.*** On products compliant to MIL-PRF-38535, this parameter does not apply.operating characteristics, VCC = 5 V, TA = 25°CPARAMETERCpdPower dissipation capacitanceTEST CONDITIONSNo load,f = 1 MHzTYP28UNITpF4POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com SN54AHCT574, SN74AHCT574OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPSWITH 3-STATE OUTPUTSSCLS245L – OCTOBER 1995 – REVISED JULY 2003PARAMETER MEASUREMENT INFORMATIONRL = 1 kΩS1VCCOpenGNDFrom OutputUnder TestCL(see Note A)TestPointFrom OutputUnder TestCL(see Note A)TESTtPLH/tPHLtPLZ/tPZLtPHZ/tPZHOpen DrainS1OpenVCCGNDVCCLOAD CIRCUIT FORTOTEM-POLE OUTPUTSLOAD CIRCUIT FOR3-STATE AND OPEN-DRAIN OUTPUTS3 VTiming Inputtw3 VtsuData Input0 V1.5 V1.5 V0 Vth3 V1.5 V0 VVOLTAGE WAVEFORMSSETUP AND HOLD TIMES3 VOutputControltPZL50% VCCtPZHOutputWaveform 2S1 at GND(see Note B)50% VCC3 V1.5 V1.5 V0 VtPLZ≈VCCVOL + 0.3 VVOLtPHZVOH – 0.3 VVOH≈0 VInput1.5 V1.5 VVOLTAGE WAVEFORMSPULSE DURATIONInputtPLHIn-PhaseOutputtPHLOut-of-PhaseOutput1.5 V1.5 V0 VtPHL50% VCCVOH50% VCCVOLtPLH50% VCCVOH50% VCCVOLOutputWaveform 1S1 at VCC(see Note B)VOLTAGE WAVEFORMSPROPAGATION DELAY TIMESINVERTING AND NONINVERTING OUTPUTSVOLTAGE WAVEFORMSENABLE AND DISABLE TIMESLOW- AND HIGH-LEVEL ENABLINGNOTES:A.CL includes probe and jig capacitance.B.Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.C.All input pulses are supplied by generators having the following characteristics:PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤3 ns, tf ≤ 3 ns.D.The outputs are measured one at a time with one input transition per measurement.E.All parameters and waveforms are not applicable to all devices.Figure 1. Load Circuit and Voltage WaveformsPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•5元器件交易网www.cecb2b.com
PACKAGEOPTIONADDENDUM
www.ti.com
30-Mar-2005
PACKAGINGINFORMATION
OrderableDevice5962-9685301Q2A5962-9685301QRA5962-9685301QSASN74AHCT574DBLESN74AHCT574DBRSN74AHCT574DGVRSN74AHCT574DWSN74AHCT574DWRSN74AHCT574NSN74AHCT574NSRSN74AHCT574PWSN74AHCT574PWLESN74AHCT574PWRSNJ54AHCT574FKSNJ54AHCT574JSNJ54AHCT574W
(1)
Status(1)ACTIVEACTIVEACTIVEOBSOLETEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEOBSOLETEACTIVEACTIVEACTIVEACTIVE
PackageTypeLCCCCDIPCFPSSOPSSOPTVSOPSOICSOICPDIPSOTSSOPTSSOPTSSOPLCCCCDIPCFP
PackageDrawingFKJWDBDBDGVDWDWNNSPWPWPWFKJW
PinsPackageEcoPlan(2)
Qty20202020202020202020202020202020
20001112000200025200020200070111
TBDTBDTBDTBDPb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)Pb-Free(RoHS)TBDPb-Free(RoHS)TBDTBDTBD
Lead/BallFinish
CallTICallTICallTICallTICUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCallTICUNIPDAUCallTICallTICallTI
MSLPeakTemp(3)Level-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NCCallTI
Level-2-260C-1YEAR/Level-1-235C-UNLIMLevel-1-250C-UNLIMLevel-2-250C-1YEAR/Level-1-235C-UNLIMLevel-2-250C-1YEAR/Level-1-235C-UNLIMLevel-NC-NC-NCLevel-2-260C-1YEAR/Level-1-235C-UNLIMLevel-1-250C-UNLIMCallTI
Level-1-250C-UNLIMLevel-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NC
Themarketingstatusvaluesaredefinedasfollows:ACTIVE:Productdevicerecommendedfornewdesigns.
LIFEBUY:TIhasannouncedthatthedevicewillbediscontinued,andalifetime-buyperiodisineffect.
NRND:Notrecommendedfornewdesigns.Deviceisinproductiontosupportexistingcustomers,butTIdoesnotrecommendusingthispartinanewdesign.
PREVIEW:Devicehasbeenannouncedbutisnotinproduction.Samplesmayormaynotbeavailable.OBSOLETE:TIhasdiscontinuedtheproductionofthedevice.
(2)
EcoPlan-Theplannedeco-friendlyclassification:Pb-Free(RoHS)orGreen(RoHS&noSb/Br)-pleasecheckhttp://www.ti.com/productcontentforthelatestavailabilityinformationandadditionalproductcontentdetails.TBD:ThePb-Free/Greenconversionplanhasnotbeendefined.
Pb-Free(RoHS):TI'sterms\"Lead-Free\"or\"Pb-Free\"meansemiconductorproductsthatarecompatiblewiththecurrentRoHSrequirementsforall6substances,includingtherequirementthatleadnotexceed0.1%byweightinhomogeneousmaterials.Wheredesignedtobesolderedathightemperatures,TIPb-Freeproductsaresuitableforuseinspecifiedlead-freeprocesses.
Green(RoHS&noSb/Br):TIdefines\"Green\"tomeanPb-Free(RoHScompatible),andfreeofBromine(Br)andAntimony(Sb)basedflameretardants(BrorSbdonotexceed0.1%byweightinhomogeneousmaterial)
(3)
MSL,PeakTemp.--TheMoistureSensitivityLevelratingaccordingtotheJEDECindustrystandardclassifications,andpeaksoldertemperature.
ImportantInformationandDisclaimer:TheinformationprovidedonthispagerepresentsTI'sknowledgeandbeliefasofthedatethatitisprovided.TIbasesitsknowledgeandbeliefoninformationprovidedbythirdparties,andmakesnorepresentationorwarrantyastotheaccuracyofsuchinformation.Effortsareunderwaytobetterintegrateinformationfromthirdparties.TIhastakenandcontinuestotakereasonablestepstoproviderepresentativeandaccurateinformationbutmaynothaveconducteddestructivetestingorchemicalanalysisonincomingmaterialsandchemicals.TIandTIsuppliersconsidercertaininformationtobeproprietary,andthusCASnumbersandotherlimitedinformationmaynotbeavailableforrelease.
Addendum-Page1
元器件交易网www.cecb2b.com
PACKAGEOPTIONADDENDUM
www.ti.com
30-Mar-2005
InnoeventshallTI'sliabilityarisingoutofsuchinformationexceedthetotalpurchasepriceoftheTIpart(s)atissueinthisdocumentsoldbyTItoCustomeronanannualbasis.
Addendum-Page2
元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com MECHANICAL DATA MLCC006B – OCTOBER 1996FK (S-CQCC-N**) 28 TERMINAL SHOWNLEADLESS CERAMIC CHIP CARRIER18171615141312NO. OFTERMINALS**111028987668584445220AMIN0.342(8,69)0.442(11,23)0.640(16,26)0.739(18,78)0.938(23,83)1.141(28,99)MAX0.358(9,09)0.458(11,63)0.660(16,76)0.761(19,32)0.962(24,43)1.165(29,59)MIN0.307(7,80)0.406(10,31)0.495(12,58)0.495(12,58)0.850(21,6)1.047(26,6)BMAX0.358(9,09)0.458(11,63)0.560(14,22)0.560(14,22)0.858(21,8)1.063(27,0)192021B SQ22A SQ23242526272812340.080 (2,03)0.064 (1,63)0.020 (0,51)0.010 (0,25)0.020 (0,51)0.010 (0,25)0.055 (1,40)0.045 (1,14)0.045 (1,14)0.035 (0,89)0.028 (0,71)0.022 (0,54)0.050 (1,27)0.045 (1,14)0.035 (0,89)4040140/D 10/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a metal lid.The terminals are gold plated.Falls within JEDEC MS-004POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.comMECHANICAL DATAMPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000DGV (R-PDSO-G**) 24 PINS SHOWN0,230,1313PLASTIC SMALL-OUTLINE 0,40240,07M0,16 NOM4,504,306,606,20Gage Plane0,250°–ā8°1A120,750,50Seating Plane1,20 MAX0,150,050,08PINS **DIMA MAXA MIN143,703,50163,703,50205,104,90245,104,90387,907,70489,809,605611,4011,204073251/E 08/00NOTES:A.B.C.D.All linear dimensions are in millimeters.This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.Falls within JEDEC:24/48 Pins – MO-15314/16/20/56 Pins – MO-194POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com元器件交易网www.cecb2b.comMECHANICAL DATAMSSO002E – JANUARY 1995 – REVISED DECEMBER 2001DB (R-PDSO-G**) 28 PINS SHOWN0,65280,380,22150,15MPLASTIC SMALL-OUTLINE0,250,095,605,008,207,40Gage Plane1A140°–ā8°0,250,950,55Seating Plane2,00 MAX0,05 MIN0,10PINS **DIMA MAX146,50166,50207,50248,502810,503010,503812,90A MIN5,905,906,907,909,909,9012,304040065/E 12/01NOTES:A.B.C.D.All linear dimensions are in millimeters.This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion not to exceed 0,15.Falls within JEDEC MO-150POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 MECHANICAL DATA PW (R-PDSO-G**) 14 PINS SHOWNPLASTIC SMALL-OUTLINE PACKAGE0,651480,300,190,10M0,15 NOM4,504,306,606,20Gage Plane0,251A70°–8°0,750,50Seating Plane1,20 MAX0,150,050,10PINS **DIMA MAX83,10145,10165,10206,60247,90289,80A MIN2,904,904,906,407,709,604040064/F 01/97NOTES:A.B.C.D.All linear dimensions are in millimeters.This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion not to exceed 0,15.Falls within JEDEC MO-153POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:ProductsAmplifiersData ConvertersDSPInterfaceLogicPower MgmtMicrocontrollers
amplifier.ti.comdataconverter.ti.comdsp.ti.cominterface.ti.comlogic.ti.compower.ti.commicrocontroller.ti.com
ApplicationsAudioAutomotiveBroadbandDigital ControlMilitary
Optical NetworkingSecurityTelephonyVideo & ImagingWireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
www.ti.com/audiowww.ti.com/automotivewww.ti.com/broadbandwww.ti.com/digitalcontrolwww.ti.com/militarywww.ti.com/opticalnetworkwww.ti.com/securitywww.ti.com/telephonywww.ti.com/videowww.ti.com/wireless